Experienced
(if you're experienced you can start here)

1. Begin / Partslist
2. Open XBOX
3. Remove DVD drive and HD
4. Unplug DVD drive and HD
5. Unscrew motherboard

6. PIN header
7. Place a box
8. Soldering LPC and HDD/D0/LAN
9. Solder alternate 5V
10. Place chip
11. Pop off the front panel
12. Place the front switch
13. Place the reset / eject adapter
14. Final testrun and FLASH

Placing your reset / eject adapter

1. remove the reset / eject cable
2. plug in the reset / eject adapter
3. remove the film and attach the reset / eject adapter to the metal casing
4. plug in the reset / eject cable in the adapter
5. plug in the cable to the chip
6. connect the cable to the chip if you haven't already done this