Beginner
(if you are a beginner start here)

Experienced
(if you're experienced you can start here)

  1. Begin / Partslist
  2. Open XBOX
  3. Remove DVD drive and HD
  4. Unplug DVD drive and HD
  5. Unscrew motherboard

6. PIN header
7. Place a box
8. Soldering LPC and HDD/D0/LAN
9. Solder alternate 5V
10. Place chip
11. Pop off the front panel
12. Place the front switch
13. Final testrun and FLASH
<< Previous

Now for the last soldering job, the 1.6 alternate 5v. Just to remind you this is only needed on 1.6 motherboards and it will fry your chip if soldered on 1.0 t/m 1.5 motherboards!

 Next >>