Beginner
(if you are a beginner start here)

Experienced
(if you're experienced you can start here)

  1. Begin / Partslist
  2. Open XBOX
  3. Remove DVD drive and HD
  4. Unplug DVD drive and HD
  5. Unscrew motherboard

6. PIN header
7. Place a box
8. Soldering LPC and HDD/D0/LAN
9. Solder alternate 5V
10. Place chip
11. Pop off the front panel
12. Place the front switch
13. Final testrun and FLASH
<< Previous

Now plug in 3 cables in the chip

  1. Front switch cable
  2. D0 / HDD / LAN cable
  3. alternate 5V cable

Now your Xecuter 2.6 lite CE chip is ready to be placed on the pin header.

Next >>